Niles Audio RCA-SM - Manual (Page 7)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI
5
Figure 3: Removable Connector Plug Figure 4: Wiring Legend
INSTALLATION
(CONTINUED)
STEP 2 – CONNECTING THE MICROSENSOR CABLE TO
THE CONNECTION HUB
For your convenience, the Microsensor cable ends have been stripped.
Insert each wire into the appropriate hole on the removable connector plug ( Figure 2), and snap the
locking tab down. To help you, the connector plug is keyed. Insert the smooth side of the connector
plug into the smooth side of the socket. Don’t force the scalloped side of the connector plug into the
smooth side of the socket. Make sure that the orientation of the connector matches the Microsensor
(
Figure 3 & 4).
TECH TIP: Wire size is expressed by it’s AWG (American Wire Gauge) number. The lower
the AWG number, the larger the wire, i.e., 20 AWG wire is physically larger than 22 AWG.