Nokia 221 T - Manual (Page 18)

GB 18
Control folder
☛
Timer
General
You can programme the Mediamaster to turn on and off at a se-
lected time on a selected channel, in conjunction with the timer
setting on your VCR.
A useful example of this function is:
If you go out and want to record different programmes on differ-
ent channels at different times you set the timer on the Media-
master to change to those selected channels.
Remember you must set the timer on your VCR in order to make
the recordings.
This function can be used for up to 8 different settings, on dif-
ferent dates, times and channels in conjunction with the capabili-
ties of your VCR’S timer.
Note! The timer function only works when the receiver is in
standby.
Timer setup
• Press select to enter the Timer setup menu.
• First, select Channel List with the buttons.
• Then, step to Channel to select the desired TV/Radio channel.
• Set the date using the numerical buttons on your remote con-
trol (dd/mm/yy).
• If you enter a wrong digit you can erase it with the button.
• Set the start and stop time using the numerical buttons on your
remote control.
The different start times may never overlap each other. If you try
to enter a start or stop time within an already occupied period of
time you will get a warning message.
• Press select to save or back to cancel.
• Press back twice to leave the Navi Bars and return to view-
ing mode.
• Press and hold to put the Mediamaster in standby.
Up to 8 different events can be predefined. The events will be
sorted in start time order.
At each stop time the box will return to standby.
You can erase a predefined event by pressing the button.
• Press back to cancel the deletion and select to delete the
event.
Control folder
☛
System info
In the menu you find general information about which hardware
and software version your Mediamaster is running on.
Navi Bars