Remote control – Nokia 221 T User Manual

Page 4

Advertising
background image

GB 4

Remote control

This section describes how to operate the Mediamaster using the buttons on the remote control.
Some of the functions can also be carried out using the buttons on the front panel.

mute/

Press once to turn the sound off/on (mute). Press and hold for a
few seconds to switch the Mediamaster into standby mode
.
Press any number button to switch it on again.

red

Function keys for interactive applications

green
yellow
blue

freeze

To freeze the picture. Press the button one more time to return
to normal viewing mode

subtitle

To show and hide subtitles.

wide

Toggle between Fullscreen, Combined and Letterbox formats.
Your Mediamaster must be set to 4:3 picture format. When set
to 16:9 the Mediamaster will automatically manage the picture dis-
play.

navi

To open or close the Navi Bars.

info

To display brief and detailed information (if transmitted) about
current and next programmes. Can be used with All TV folder in
Navi Bars.

cancel

Function key for interactive applications.

select

Confirm choices and selection of a highlighted item.

Move up/down in the Navi Bars and menus and to
change channels.

Move left/right in the Navi Bars, in menus and to adjust sound.

P+ P-

Change channels up and down, one at a time. Return to TV mode
from an interactive application.

back

Go back one level at a time within menus

+ -

Adjust the volume. The Mediamaster’s maximum volume level
is controlled by the TV’s volume setting.

0 - 9

Change channel and to select individual menu options.
Note: If 0 is entered as the first digit, the TV Release functional-
ity is activated (see below).

0

TV Release. To switch between digital TV/Radio and analogue TV,
satellite TV and VCR. Function may not be available on all TV and
Video models.

opt

Show service options in viewing mode. Only applies to the chan-
nel you are watching.

txt

Press to enter teletext (if available).

Advertising