Net Optics 96547iTP - Manual (Page 21)

iTap GigaBit Dual Port Aggregator
17
To monitoring device 2
To monitoring device 1
B 1 2 A
www.netoptics.com
®
RESET
Network
Monitor
1
2
B
A
Dual Port Aggregator
GigaBit Copper
TM
LINK ACT LINK ACT LINK ACT LINK ACT
Figure 13: 96547iTP Monitor Connections
Connecting Power
For power fault protection, the iTap has redundant power supplies. The second
power supply is available to support the fl ow of traffi c to the monitoring device in
the event that the fi rst power supply becomes unavailable. If the fi rst power supply
is unavailable, the second power supply provides all power for the iTap. Even if no
power is available to the passive iTap, network traffi c fl ows uninterrupted.
If you plan to use redundant power, make sure that you connect the power supplies
to two separate, independent power sources. After connecting the power supplies,
verify that at least one Power LED is illuminated.