Net Optics 96547iTP - Manual (Page 36)

iTap GigaBit Dual Port Aggregator
32
Tip! _____________________________________________________________________
To use pop-up menu shortcuts, click your right mouse button in the System Frame.
__________________________________________________________________________
Using the Toolbar
Figure 26 shows the System Manager toolbar.
Figure 26: Toolbar
The table below describes the icons found on the toolbar.
Tool Description
New iTap Add iTaps to a group
New Group Create an iTap group
Delete Delete iTap from the system
Modify Change the iTap name, IP address, model, and add notes
Refresh Refresh the data display
Exit Close Net Optics System Manager
About View information about System Manager
Creating a Group
You can organize iTap devices into groups for quick access. You must create a
Group before you can add iTaps to your system.
To create an iTap group:
1. Click New Group in the toolbar as shown in Figure 27. A new group bar
appears in the System Frame as shown in Figure 28.
Figure 27: New Group