NEC XT5100 - Manual (Page 41)

E – 35
5. To enable your setting, select Active on the Execute Switch.
6. Select OK and press the ENTER button on the remote control to complete
the setting.
NOTE: When On Timer is set and the projector is in the standby mode, the
Status indicator flashes green to show that On Timer program is active. The
projector must be in stand-by mode at the time of turning on. The preset
power-on time will be void if the cooling fan is working or an error occurs.
Unplugging the projector cancels your 1 Week programs regardless of
whether the program was executed or not. However, your Every Week pro-
gram will not be cancelled even if you unplug the projector.
Sleep Timer
1. Select your desired time between 30 minutes and 2 hours in 30 minute
increments.
2. Select Set and press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
Menu
[Page 1]
Allows you to set preferences for the on-screen menu.
Press "OK" to save your changes for all the features.
Menu Mode
This feature allows you to select two menu modes: Advanced Menu
and Basic Menu.
Advanced Menu .......... This is the menu that contains all the available menus
and commands.
Basic Menu ................. This is the factory preset menu that contains the basic
menus and commands. You cannot customize this
menu.
The factory default Basic menu includes:
Source Select (RGB1/2/3, Component(YCbCr), Video1/2, S-Video1/
2, RGB (Digital), SDI and Entry List), Brightness, Contrast, Pixel
Adjust and Position.
Language
You can choose one of seven languages for on-screen instructions.
The options are: English, German, French, Italian, Spanish, Swedish
and Japanese.
Menu Display Time
This option allows you to select how long the projector waits after the
last touch of a button to turn off the menu.
The preset choices are "Manual", "Auto 5 sec", "Auto 10 sec", and "Auto
30 sec". The "Manual" is the factory preset.
Manual ......... The menu can be turned off manually.
Auto 5 sec .... The menu will automatically be turned off in 5 seconds if no
buttons are pressed within 5 seconds.
Auto 10 sec .. The menu will automatically be turned off in 10 seconds if no
buttons are pressed within 10 seconds.
Auto 30 sec .. The menu will automatically be turned off in 30 seconds if no
buttons are pressed within 30 seconds.
[Page 2]
Display Select
You can choose the desired status information to be displayed on the
screen. The desired status information will be displayed each time you
switch between sources.
Date Format
Eight display formats can be selected. This date format sets the current
date that appears on the upper left corner of the screen.
Date, Time Preset
Setting the Current Date and Time
You can set the current time, month, date, and year.
1. Type in date.
Enter month, date and year in this order using INPUT buttons on the re-
mote control.
Month and date must be entered in two digits. For example, to display
"February", press "0" and "2".
2. Type in time.
Time is expressed in the 24-hour format. For example, 6:00 p.m. is en-
tered as 18:00.
3. Select "OK" and press ENTER.
Closing the window allows the clock to start.
The current year, month, date and time are displayed on the top of the
screen.
NOTE: The projector has a built-in clock. The clock will keep working for
about 3 days after the main power is turned off. If the main power is off for
3 days or more, the built-in clock will be reset. If the built-in clock is reset,
set the date and time again. The built-in clock will not reset while in the
standby condition.