NEC XT5100 - Manual (Page 50)

E – 44
List of Menu Items Available on Link Mode
9.
Function Link mode
Menu Source Select L
Adjust(Source) Picture L
White Balance L
Image Pixel Adjust L
Position N
Aspect Ratio L
Resolution L
Overscan L
Video Filter L
Blanking N
Video Adj N
Option Adj N
Lens Memory N
Switcher N
Ref Adj Keystone N
Lamp N
Ref. White Bal. N
Factory Default N
Projector Options Timer L
Menu M
Setup N
Link Mode M
Switcher Control N
PC Card Files N
Help M
Test Pattern N
Direct Button LENS SHIFT Projector I
Remote Control N
FOCUS Projector I
Remote Control I
ZOOM Projector I
Remote Control I
MENU Projector L (*1)
Remote Control L (*1)
POWER Projector L (*2)
POWER ON Remote Control L (*2)
POWER OFF Remote Control L (*2)
INPUT Remote Control L (*1)
MUTE(PICTURE) Remote Control L (*1)
MUTE(SOUND) Remote Control L (*1)
MUTE(OSD) Remote Control L (*1)
AUTO Remote Control N (*3)
TEST Remote Control N
PC Control All
Each letter used in the above note means the following
Letter Master projector Slave projector (s)
L valid linked
N invalid invalid
M valid invalid
I independently adjustable independently adjustable
See the table below for available functions in the digital link mode (XT5100 only) and the analog link mode.
* The digital signals available in the Link mode are the VESA compatible-signals except interlaced signals of VGA@60Hz to XGA@85Hz.
* The VESA compatible signals that can connect to the master projector as analog input and connect to the slave projector as digital output are
interlaced signals of SVGA@85Hz, XGA@60Hz, XGA@70Hz, XGA@75Hz and XGA@85Hz.
* Video (NTSC, PAL, SECAM), YCbCr(50Hz/60Hz), 480p, 720p, SDI (525/625) signals can be supported.
Use a commercially available distribution amplifier to connect each projector when connecting the other signals.
No restriction.
Comply with the
above specifica-
tions.
*1 Each adjustment is not possible on the
slave projector in the link mode.
*2 Each adjustment is possible on the slave
projektor in the link mode.
*3 Auto Adjust in Setup is not available.