Netcom NB5 - Manual (Page 44)

Advanced
NetComm NB5 Ethernet/USB Modem Router YML717 Rev1
44 www.netcomm.com.au
Static Connection Setup
Most Internet users are provided with a dynamic IP address by their ISP for each session, however
certain situations call for a Static IP address. This is typically when you want to host a website, or
use VoIP or video-conferencing applications where other users must regularly connect to your
computer. Static IP numbers are generally made available by ISPs for these purposes for an
additional fee. The following instructions will allow you to set up your NB5 to manage a Static IP
connection.
Select WAN Setup>New Connection. From Type: Select Static.
Enter the Static connection name: the name must be unique, must not contain spaces and must not
begin with a number [e.g. static_1]
NAT Option: Network Address Translation is on by default [recommended].
Firewall [SPI]: Firewall is on by default [recommended].
Allow Incoming Ping: Unchecked by default [recommended]. Check only if this function is required
for testing purposes.