Netcom NB5 - Manual (Page 69)

Advanced
YML717 Rev1 NetComm NB5 Ethernet/USB Modem Router
www.netcomm.com.au 69
Tools Menu
System Commands
To access System Commands, Click on Tools>System Commands.
Save All: Press this button in order to permanently save the current configuration of the Gateway. If
you do re-start the system without saving your configuration, the Gateway will revert back to the
previously saved configuration.
Restart: Use this button to re-start the system. If you have not saved your configurations, the
Gateway will revert back to the previously saved configuration upon re-starting.
NOTE: You will be redirected to the NB5 Homepage after the unit has successfully
rebooted.
Restore Defaults: Use this button to restore factory default configurations.
NOTE: You will be redirected to the NB5 Homepage after the unit has successfully
been restored to factory default configurations.
User Management
To access User Management, click on Tools>User Management.
This screen enables you to change your User Name and/or Password. It is recommended that you
change the User Name and password from the default 'admin' to ensure the security of the NB5.
CAUTION: If you forget your user name and password, access to the NB5 interface can
only be gained by resetting the unit to factory defaults. In this case, all user-
configured settings will be lost and will need to be re-entered.
TIP: Your NB5 Username and Password fields are NOT the same fields as the
Username and Password for your ISP account.