N-Tron 102PC-SE - Manual (Page 18)

(Revised 2010-11-15) 18
 Socket
(Actions to take over a UDP socket)
o close (closes a socket by its handle <socket_handle>)
o closeall (closes all the sockets)
o flush (flush out a socket by its handle <socket_handle>)
o flushall (flush out all the sockets)
o listall (lists all the sockets (TCP connect, TCP listen, and UDP sockets))
o listlisten (lists all the TCP listen sockets)
o recv [-s <max_size>] <socket_handle> (receive over a socket)
o send < [-s <size>] [-d <delimiter>] > [-m <MTU>] <socket_handle> (send over a socket)
o stat [-s] [-d] <socket_handle> (lists stats for sockets, -s: socket only, -d: socket detail)
o tcp <remote_ip> <remote_port> (set up the tcp socket information)
o tcplisten <local_port> [backlog] (listen on a TCP socket)
o udp <remote_ip> <remote_port> [local_port] (for UDP server set remote_ip to 0.0.0.0)
note: local_port is required for UDP server
 Telnet
(Allows telnet sessions from the hyper terminal over the serial port)
 Ftp
(Allows FTP sessions from the hyper terminal over the serial port)
 Exit
(Logs the user off the telnet or hyper terminal session)
 Restore default-config
(Sets all config settings back to the default configuration file)