Nordic Star Products MFC-3420C - Manual (Page 75)

SETUP RECEIVE 5 - 12
Sequential Polling
The machine can request documents from several fax units in a
single operation. You just specify several destinations in Step 5.
Afterward, a Sequential Polling Report will be printed.
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu/Set , 2 , 1 , 7 .
3
Press or to choose
Standard , Secure or Timer .
Press Menu/Set when the screen displays the setting you
want.
4
If you selected Standard , go to Step 5.
■
If you selected Secure , enter a four-digit number and press
Menu/Set , and then go to Step 5.
■
If you selected Timer , enter the time (in 24-hour format) you
want to begin polling and press Menu/Set , and then go to
Step 5.
5
Specify the destination fax machines (up to 390), which you
wish to poll by using Speed-Dial, Search, a Group (see Setting
up Groups for Broadcasting on page 7-3) or the dial pad. You
must press
Menu/Set between each location.
6
Press Mono Start or Colour Start .
The machine polls each number or group in turn for a document.
Press Stop/Exit while the machine is dialling to cancel the
polling process.
To cancel all sequential polling receive jobs, press Menu/Set ,
2 , 6 . (See Cancelling a scheduled job on page 6-11.)
7.Polling RX