NEC 308 - Manual (Page 2)

Placing an Outside Call . . .
The instructions in this guide assume your system
uses default program settings (e.g. Dial Plan 2).
1. Lift handset.
2. Press
3. Dial a 2-digit outside line number (e.g.,
01, 02).
4. Dial outside number.
• If your system is behind a PBX, you may
have to dial 9 before your number.
• To Flash a CO line, flash the hook-
switch and dial 90.
Calling a Co-Worker . . .
1. Lift handset.
2. Dial your co-worker’s extension number.
• If you hear ringing, wait for an answer.
If you hear a beep, begin speaking.
• To Page, dial 80 for All Call or 81-84
for internal zones. External zones are
85 or, for Portrait 824 only, 86-87.
3. (Optional) Dial to force the call to
ring your co-worker.
Block outgoing calls from your phone . . .
Dial Block
1. Lift handset.
2. Press .
3. Dial Personal Code (4 digits).
4. Hang up.
Enter 4-digit code
to temporarily block
outgoing calls on
your phone:
Dial using the
Intercom:
Dial access code for an
outside line:
Placing and Answering Calls
82400SLO04.QXD 3/29/01 4:51 PM Page 1