NEC 308 - Manual (Page 4)

Message Waiting
1. Do not hang up if there is no answer.
2. Press .
• MW on your co-worker’s multibutton
phone flashes fast.
3. Hang up.
A Message Waiting is indicated by a moderate
busy-type signal when the handset is first lifted.
1. Lift handset.
2. Press .
Have a telephone meeting (Conference) . . .
1. Set up your first outside call and press the
hookswitch.
2. To add an internal party: Press .
The called extension must pick up the
handset in order to be conferenced.
OR
2. To add an outside call: Press .
3. Place your second call.
Internal Calls:
The called internal extension must pick
up the handset before being Conferenced.
External Calls:
To place a second call, you first must seize
the outside line to be used. Dial 01-08,
then dial the telephone number.
4. Press the hookswitch again.
Use Conference to
have a 3-way
telephone meeting:
To answer your own
Message Waiting:
Leave a Message
Waiting so your
co-worker can call
you back:
82400SLO04.QXD 3/29/01 4:52 PM Page 3