Eizo LA-012-W - Manual

Thank you very much for choosing an EIZO product.
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.
PRECAUTIONS
To ensure personal safety and proper maintenance, please read this
section and the caution statements on the unit.
[Location of the Caution Statements]
WARNING
Do not attempt to install the unit yourself.
To install the monitor with this product, it is required the expert knowledge of building
techniques. Refer the installation to qualified personnel.
Attach the applicable EIZO LCD monitor only.
Not doing so may cause the arm or monitor to fall, which may result in injury or
equipment damage.
Affix the arm securely on the base.
Not doing so may cause the monitor to fall and result in injury or equipment damage.
Affix the arm on an appropriate base.
Do not affix the arm on such a base as shown below or on a weak base which cannot
support the monitor or arm. Affixing the arm on these bases may cause the monitor to
fall and result in injury.
Do not tilt No opening Do not run over
Clamp the screws of the arm tightly.
If the arm becomes unstable, clamp the screws of the arm securely again. Loose clamping
may cause the monitor to fall and result in injury or equipment damage.
Do not hang from or lean on the arm.
Doing so may cause the monitor to fall and result in injury or equipment damage.
When moving the arm, be sure not to pinch a finger between the moving parts.
Do not rotate the monitor more than necessary or reverse direction.
Twisting or breaking cable may result in fire or electric shock.
Do not disassemble.
The spring mechanism inside of the stand may result in injury or equipment damage when
disassembling.
Attach the arm with another person.
Do not attach it alone. Doing so may result in injury or equipment damage.