Eizo LA-012-W - Manual (Page 3)

2.
Attach the monitor attachment of the arm to the monitor.
(1) Attach the arm to the monitor with specific screws (4 points).
(2) Put in the arm covers to the shield plate with sliding them rightward or leftward.
(1) (2)
NOTE
Use specified screws for tightening up between the arm, fitting and monitor referring to the
‘Compatible Screws List’.
3.
Attach the monitor on the wall.
(1) Put the monitor attachment on the wall anchor.
Wall Wall
Wall
(2) Attach the wall anchor to the monitor attachment with the flat head screws (M4 x 8, 3 points).
Fix the center of the hole with a flat head screw and move the monitor from side to side then fix the
rest of the holes with screws.
NOTE
When attaching the wall anchor to the arm, confirm that the hook is securely fit in the slot and fix
them with screws.