NEC Server 140Rc-4 - Manual (Page 219)

Installing and Using Utilities 6-23
12. Turn off the power of the server and then on again to restart the system. After a single
reboot, MWA Remote Console displays the main menu of NEC EXPRESSBUILDER and
you can operate tools on the server through the management PC.
NOTE: The main menu appears without rebooting it when the setting
in the configuration information file is already established.
13. When the main menu appears on the screen of the management PC, remove the floppy
disk from the floppy disk drive.
14. Select the [Properties] command from the popup menu displayed by clicking the right
mouse button on the server name to display the [Properties] dialog box.
Execute [Connection Check] on the [ID] tab page.
15. When you want to operate other tools, remove the NEC EXPRESSBUILDER CD-ROM
from the CD-ROM drive and turn off and on the server from MWA Remote Control
Manager to start other tools.
Select [Power control] command from the popup menu displayed by clicking the right
mouse button on the server name. You can turn off/on the server.
IMPORTANT: When the Operation with remote console is end,
remove the check of [RESET] of [Activate] in thr [Properties] dialog
box and reboot the server.