NEC Server 140Rc-4 - Manual (Page 42)

2-8 General Description
8 UID lamp (blue)
This lamp is lit when the UID switch is pressed.
9 Keyboard connector
The keyboard connector is connected with PS/2 type keyboard.
10 Mouse connector
The mouse connector is connected with the PS/2 type mouse.
11 Serial port A connector
The serial port A connector is connected with a device having the serial interface.
The server can't directly be connected to a leased line through the connector.
12 Monitor connector
The monitor connector is connected with the display unit.
13 USB-1 - USB-2 connectors
The USB-1 (upper) and USB-2 (lower) connectors are connected with devices accepting the
USB interface.
14 Additional PCI board slots
Optional PCI boards (32-bit/33MHz) may be inserted into the slots.
15 Additional PCI board slots
Optional PCI boards (64-bit/100 MHz) may be inserted into the slots.
16 Additional PCI hot-plug board slots
Optional PCI hot-plug boards (64-bit/100 MHz) may be inserted into the slots.
17 LINK/ACT lamp
The LINK/ACT lamp shows the LAN access status.
18 LAN1 connector
The LAN1 connector is connected with a network system on LAN. This port can be operated
through 100BASE-TX or 10BASE-T interface.
19 LAN2 connector
The LAN2 connector is connected with a network system on LAN. This port can be operated
through 1000BASE-T, 100BASE-TX or 10BASE-T interface.
20 100/10 lamp
The 100/10 lamp indicates the LAN transfer rate.
21 1000/100/10 lamp
The 1000/100/10 lamp indicates the LAN transfer rate.