Nokia NSERIES N800 - Manual (Page 15)

Your device
15
Text input settings
To define the text input settings, tap , and select
Settings > Control panel . In Control panel , select
Text input settings . For more information, see the device
help.
Volume control
To adjust the master volume of your device, tap on the
status indicator area. To set the master volume, drag the
volume slider with the stylus, or tap [+] or [-]. The master
volume overrides all other volume settings in the device.
Warning: Do not hold the device near your
ear when the loudspeaker is in use, because
the volume may be extremely loud.
Device lock
To prevent unauthorised use of your device, change the
lock code, and set the device to automatically lock after a
certain time-out period.
To lock the device, briefly press the power key, select
Lock device > OK . If you have not set the lock code, you
are asked to do so. To unlock the device, enter the lock
code, and select
OK .
To edit the device lock settings, tap , and select
Settings > Control panel . In Control panel , select
Device lock .
To set the time-out period, select Autolock period and the
desired time.
Change lock code
To change the lock code, do the following:
1. Tap , and select Settings > Control panel .
2. In Control panel , select Device lock >
Change lock code .
3. Enter the current lock code, and select OK . The default
code is 12345.
4. Enter the new code, and select OK .
5. Enter the new code again, and select OK .
If you select Cancel in any of these dialogs, the device lock
code is not changed.
Keep the new code secret and in a safe place separate from
your device.