NEC LCD2190UXi - Manual (Page 24)

22
Tag 7
continued
SIDE BORDER
COLOR
Adjusts the side black bars color between black and white.
For wide aspect monitors.
LED BRIGHTNESS Controls the brightness of the LED on the front of the
monitor.
LED COLOR The LED on the front can be blue or green.
COLORCOMP This function electronically compensates for the slight variations
in the white uniformity level as well as for deviations slight
differences in color that may occur throughout the display area
of the screen. These variations are characteristic of LCD panel
technology. This function improves the color and evens out the
luminance uniformity of the display.
NOTE: Using the COLORCOMP feature does reduce the
overall peak luminance of the display. If greater luminance
is desired over the uniform performance of the display, then
COLORCOMP should be turned off.
COLORCOMP
LEVEL
Select the level for ColorComp adjustments.
Tag 8 LANGUAGE OSM control menus are available in eight languages. Press
“Left” or “Right” to select.
OSM H.POSITION You can choose where you would like the OSM control image
to appear on your screen. Selecting OSM Position allows you
to manually adjust the location of the OSM control menu left, or
right.
OSM V.POSITION You can choose where you would like the OSM control image
to appear on your screen. Selecting OSM Position allows you
to manually adjust the location of the OSM control menu up, or
down.
OSM TURN OFF The OSM control menu will stay on as long as it is in use.
You can select how long the monitor waits after the last touch of
a button to shut off the OSM control menu. The preset choices
are 10-120 seconds by 5 seconds increments. Press “Left” or
“Right” to select.
OSM LOCK OUT This control completely locks out access to all OSM control
functions. When attempting to activate OSM controls while in
the Lock Out mode, a screen will appear indicating the OSM
controls are locked out.
There are four ways to use OSM LOCK OUT function:
1: OSM LOCK OUT with BRIGHTNESS and CONTRAST
control: This mode locks all OSM functions except for
BRIGHTNESS and CONTRAST.
To activate, press the SELECT and “Up” buttons
simultaneously, while in the OSM menu.
To deactivate, press the SELECT and “Up” buttons
simultaneously, while in the OSM menu.
Advanced OSM Controls
– continued