NEC LCD2190UXi - Manual (Page 36)

34
Specifications
– continued
LCD Module Diagonal: 21.3 inch Active matrix; thin film transistor (TFT)
Viewable Image Size: 21.3 inch liquid crystal display (LCD); 0.270 mm dot
Native Resolution (Pixel Count): 1600x1200 pitch; 250cd/m 2 white luminance; XtraView+™
technology; 500:1 contrast ratio, typical
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI
Sync: Separate sync. TTL Level Positive/Negative
Composite sync. Positive/Negative
Sync on Green (Video 0.7Vp-p and Sync Negative 0.3V p-p)
Display Colors 16,777,216 Dependant on display card used.
Synchronization Horizontal: 31.5 kHz to 91.1 kHz; 99.4 kHz*2 Automatically
Range Vertical: 50.0 Hz to 85.0 Hz Automatically
Viewing Angle Left/Right: ± 89˚ (CR>10)
Up/Down: ± 89˚ (CR>10)
Image Formation Time 20ms (Typ.) 10ms (Gray to Gray Typ)
Resolutions Supported 720 x 400*1 at 70 Hz to 85 Hz Some systems may not support
640 x 480*1 at 60 Hz to 85 Hz all modes listed.
800 x 600*1 at 56 Hz to 85 Hz
832 x 624*1 at 75 Hz
1024 x 768*1 at 60 Hz to 85 Hz
1152 x 864*1 at 70 Hz to 85 Hz
1152 x 870*1 at 75 Hz
1280 x 960 *1 at 60 Hz
1280 x 1024*1 at 60 Hz to 85 Hz NEC DISPLAY SOLUTIONS cites
1200 x 1600 *1 at 60 Hz recommended resolution for optimal
1600 x 1200 at 60 Hz................................... display performance.
Active Display Area Landscape : Horiz. : 432 mm/17.0 inches
Vert. : 324 mm/12.8 inches
Portrait : Horiz. : 324 mm/12.8 inches
Vert. : 432 mm/17.0 inches
Power Supply 100 - 240 V ~ 50/60 Hz
Current Rating 0.68 – 0.29A (with option)
Dimensions Landscape: 464.8 mm(W)×424.8-574.8mm(H)×247.3 mm(D)
18.3 inches(W)×16.7-22.6 inches(H)×9.7 inches(D)
Portrait: 358.6 mm(W)×477.9-627.9 mm(H)×247.3 mm(D)
14.1 inches(W)×18.8-24.7 inches(H)×9.7 inches(D)
Height Adjustment: 150 mm / 5.9 inches (Landscape)
Weight 10.9 kg
24.0 lbs
Environmental Considerations
Operating Temperature: 5°C to 35°C/41°F to 95°F
Humidity: 30% to 80%
Altitude: 0 to 10,000 Feet
Storage Temperature: -10°C to 60°C/14°F to 140°F
Humidity: 10% to 85%
Altitude: 0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the
screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
*2 1200 x 1600 resolution only.
NOTE: Technical specifications are subject to change without notice.
Monitor MultiSync ®
Specifications LCD2190UXi Notes