Nokia 9450 S - Manual (Page 13)

GB 13
You can use manual channel search if you want to add new
channels later. For example If you have a special antenna
configuration which is not assigned in the Antenna
alternative menu, you can add new channels using the
manual channel search function. When you perform a
Manual Search you first need to enter some parameters for the
channel search to work. The information you need to enter in
this menu is available in magazines covering satellite TV
reception, on the Internet or from your Service Provider.
Antenna Alternative: Select Antenna Alternative 1 to 16 that corresponds to the antenna which
you wants to use for the search.
Transponder Freq (MHz): Specify the frequency in GHz. using the numbered buttons on your
remote control. If you enter the wrong number, erase it with the left arrow button.
Polarization: Select polarization; Horizontal or Vertical .
Symbol Rate (Msym/S): Enter the rate with the numbered buttons.
FEC: Enter the appropriate Forward Error Correction (FEC) value or select Auto .
Network Search: Select: Yes to search from all
transponders used by a specific Service Provider.
( Yes is the default setting). Select No to search only from
the transponder that you have entered on the line
Transponder Frequency . (Useful if you do not want to
search through all transponders for a specific program
distributor).
By pressing the OK button you can now enter the channel
search menu where the Mediamaster starts to search for
channels from the satellite.
The following will describe the basic functions of your Mediamaster while watching TV or listening to
radio channels.
Sometimes the information may not be displayed as illustrated. Many of the functions
described here are dependent on the Service Provider and/or can only be used if they are
included in the transmitted programme information.
Please note that during the Channel Search procedure, the Mediamaster has downloaded ALL
available channels. This may include channels from various Service Providers, also those to which
you normally do not have access. If you select a programme to which you do not have access, you
will get the message Service is scrambled or not running on the screen.
Manual Channel Search
VIEWING TV
General Information