Nokia 9450 S - Manual (Page 7)

GB 7
Refer to your video recorder manual for full instructions.
Connect one SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Connect another SCART cable between the VCR and
the AUX SCART socket on the Mediamaster.
Connect the RF cable from the RF output on the VCR
to the TV aerial input on the TV.
Connect the TV aerial to the RF input socket on the VCR.
Connect a SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Connect an RF cable from the RF output on the VCR to
the TV aerial input on the TV.
Connect an RF cable from the TV/VCR output on the
Mediamaster to the RF input socket on the VCR.
Connect the TV aerial to the TV AERIAL input socket on the Mediamaster.
Connect a SCART cable between the main
SCART socket on the TV and the TV SCART
socket on the Mediamaster.
Connect a SCART cable between the VCR and the
AUX SCART socket on the Mediamaster.
Connect an RF cable from the RF output on the
VCR to the TV aerial input on the TV.
Connect an RF cable from the RF output on the
Analogue receiver to the RF input socket on the
VCR.
Connect the TV aerial to the RF input socket on the
Analogue receiver.
In order to switch the signal from the dish between the analogue and digital receivers, you need a
Universal Twin LNB.
Cable A between output A on the LNB to the LNB socket on the analogue receiver.
Cable B between output B on the LNB to the ANTENNA socket on the Mediamaster.
Both the VCR and the analogue satellite receiver must be tuned to different UHF channels (than the
Mediamaster) when using RF-connectors.
Connecting to a TV and a Video recorder
If Your VCR does not have a SCART connector
Connecting to an Analogue satellite receiver and
a Video recorder
VCR