Nortel Networks Application Server 53r 5300 00 User Manual
Page 58
58
Platform software installation
The Date and Time is displayed.
13
Do one of the following:
Enter Y to accept the configuration.
OR
Enter N to change the BIOS hardware clock.
After the configuration is accepted, the user accounts display.
14
Press Enter to continue.
15
At the Password Configuration screen, enter passwords for the
mandatory system accounts:
•
root
•
bootloader
•
ntossadm
•
nortelrps
You can refer to
"Configuring accounts and passwords" (page
for more information on these steps.
The System Configuration Complete screen appears.
Attention:
For NTP configuration changes, if symmetric keys
were used, you must restore the keys to the server and execute
the ntpConfig.pl script after installation.
16
Press Enter to continue the installation.
The installer applies the system configurations. This may take
several minutes. When the configurations are complete, the CD
ejects and the server reboots.
The operating system and all stored configurations imported from
the backup file, such as ACL and IPSec configuration, are now
restored to the server. For information on backup and restore,
see Nortel AS 5300 Security (NN42040-601).
17
If applicable, apply any Linux Maintenance Release patches to
bring the system up to date with current baselines.
--End--
Application Server 5300
Nortel AS 5300 Installation
NN42040-300
01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.