Nokia 3586I - Manual (Page 122)

[ 113 ]
Organizer
• Reset - clears the current timing data and resets the timer.
• Start - restarts the split timer from the point the timer was stopped.
Time an event using lap timing
The lap time function allows you to measure the amount of time it takes
to complete a cycle or lap. To measure lap time:
1 From the Organizer menu, scroll to Stopwatch and press Select.
2 Scroll to Lap timing, then press Select.
3 Press Start. The running time appears on the display.
Once the lap timer has started, your can:
• Press Stop to stop the timer and view the elapsed time.
• Press Lap. The lap time is displayed and the timer restarts from zero.
If you continue pressing Lap, the most recent lap time appears at the top
of the list of lap times. You can scroll to review previous times.
Press Stop to stop the timer. The final lap’s time is displayed.
Choose other stopwatch options
You can choose the following options from the Stopwatch menu.
Note: If you receive a call while using the Stopwatch, the timer
continues running in the background. After ending the call, you
can redisplay the timer by doing the following:
1 Press Menu 10-4-1 (Organizer > Stopwatch > Continue).
2 Press Select.
Option Description
Continue Used to re-display active timer (example: if you receive
a call while the timer is still running).
Show last
time Allows you to view the last measured time.
View times Allows you to view the list of saved times.
Delete
times Allows you to delete the saved times. You can delete
the saved times one by one or all at once.