Network Computing Devices 300 - Manual (Page 16)

NCD ThinSTAR 300 Basics
1-12 NCD ThinSTAR 300 User’s Guide
The Connection Manager lets you:
■ Start connections or switch among currently active
connections.
— Select the desired Connection Name and click
Connect (or simply double-click the Name).
■ Stop connections.
— If problems on the server cause your connection to
not respond to a normal logoff (see the following
section “Logging Off” on page 1-13) bring up the
NCD ThinSTAR Connection Manager, select the
connection and click End .
■ Add or edit new connections.
— Use the Configure tab. Clicking Add brings up a
New Connection panel. Depending on which
connection type you choose, data entry panels
display. Complete all needed entries and click
OK .
Note If the configure tab is not displayed, your
system administrator has disabled it.
Starting Multiple Connections
The NCD ThinSTAR 300 allows multiple simultaneous
connections to one or more servers. The number of
connections you start is limited by the amount of
memory in your terminal.
To start your second connection:
1. Press CTRL+ALT+END to bring up the NCD ThinSTAR
Connection Manager.
2. Select the Connection Name to start, then press
Connect .
To switch between your running connections:
1. Press CTRL+ALT+END to bring up the NCD ThinSTAR
Connection Manager.
2. Select one of the Connection Names whose “Status”
field is “ Active ”, then click Connect .