Network Computing Devices 300 - Manual (Page 9)

NCD ThinSTAR 300 Basics
NCD ThinSTAR 300 User’s Guide 1-5
If the Connection Manager Displays
Depending on how your terminal is configured, the NCD
Thin STAR Connection Manager may list one or more
connections. If the Connection Manager displays:
1. Select a connection by clicking on its Connection
Name in the connection list and clicking Connect (or
simply double-click the Name). If the connection was
defined for automatic logon, and the server it connects
to is running, the terminal makes the connection and
you are logged on.
2. If the a Logon Information panel displays:
a. Enter your User name and Password .
b. If the Domain or From field displayed in the panel
is not correct, select another from the drop-down
list.
c. Click OK .
For more detailed information about the Windows NT 4.0
desktop, see Chapter 2.
If the Setup Wizard Displays
The first time a terminal starts, the NCD Thin STAR Setup
Wizard displays. The wizard may also display under
other circumstances.
Ask your system administrator whether you need to
change any of the data in the wizard screens. The
following instructions assume you are going to use the
terminal’s default values, which should work well under
most conditions.
To page through the Wizard:
1. Click Next in the first Wizard page.
2. Click Accept in the license acceptance page.
3. Click Next in all of the remaining data entry pages.
4. In the last page, click Finish . You now have a default
connection configured for your terminal.