NETGEAR ReadyNAS 3200 - Manual (Page 26)

ReadyNAS 3200 Hardware Manual
2-8 Diagnostics and Maintenance
v1.1, July 2009
b. Hold the display of the final LEDs in the pattern (on on), and wait for you to confirm the
selection.
4. Press and hold the reset button for 3 seconds to confirm the menu selection and proceed with
that option.
The system will do the following:
a.
Blink both LEDs twice to confirm the selection.
b. Proceed with clearing the disks.
c. Power down.
5. Power on the system.
The system will do the following:
a.
Reboot.
b. Perform disk diagnostics.
The disks will now need to be formatted.
6. Run the RAIDar utility. RAIDar will prompt you to click Setup.
Figure 2-2