Nikon P5000 - Manual (Page 117)

Technical Notes
105
Restrictions on Camera Settings
Restrictions apply to the following settings in P, S, A, M, and T modes:
A
Auto Noise Reduction
Noise reduction will only turn on automatically if Continuous is set to Single and BSS
and Auto bracketing are off.
Using a Flash in Continuous Mode ( B 73)
The built-in flash turns off automatically when Continuous is selected for Continuous;
optional flash units mounted on the camera accessory shoe can still be used.
Self-timer
( B 26)
If self-timer is on, only one shot will be taken each time shutter is released,
regardless of settings chosen for Continuous, BSS, and Auto bracketing.
Original Continuous, BSS, and Auto bracketing settings are restored when
picture is taken or self-timer is turned off.
Continuous
( B 73)
Selecting option other than Single for Continuous turns BSS and Auto
bracketing off.
BSS
( B 75)
When BSS is on, Continuous is set to Single and Auto bracketing turns off.
Auto
bracketing
( B 75)
When Auto bracketing is on, Continuous is set to Single and BSS turns off.