Nikon P5000 - Manual (Page 91)

Menu Guide
79
This option is for use with the optional converter lenses listed below. Note that
these accessories require a lens adapter ring (available separately); for more
information, see page 92 of this manual or the documentation provided with
the converter lens.
At settings other than None, a converter icon appears in the display.
e Converter
Option Description
4
None
(default) No modifications made to camera settings. Use when no converter lens is
attached (be sure to remove lens adapter ring).
g
Wide-angle
converter
Use with WC-E67 wide-angle converter.
Camera zooms to widest angle; menu
shown at right is displayed. Choose from:
• Distortion control on (default): Correct for
pin-cushion and barrel distortion. Con-
tinuous set to Single (
B 73); BSS and
bracketing can not be used ( B 75).
Note : Distortion control reduces the area visible in the final picture.
• Distortion control off: No distortion correction performed.
Zoom can be adjusted manually while Wide-angle converter is in effect;
note, however, that best results will be achieved with camera zoomed out.
Focal length at widest angle is 24mm (35-mm format equivalent, distor-
tion control off ).
f
Telephoto
converter
Use with TC-E3ED telephoto converter. Camera will zoom all the way in;
optical zoom is restricted to positions near maximum zoom. Focal length
at maximum zoom is 378mm (35-mm format equivalent). Focus mode
can not be adjusted.
A
Converter
Be sure to select the appropriate option when using a converter lens. Select None when
no converter lens is attached. At settings other than None, the built-in flash and AF-assist
illuminator turn off, Continuous flash (
B 73) can not be used. Optional flash units can
still be used, although the converter may cast shadows in pictures taken with the SB-400,
SB-600, or SB-800 (
B 93; a wide panel is recommended when shooting with the SB-600 or
SB-800). Check pictures in the monitor after shooting.