National Instruments FP-PS-4 - Manual (Page 2)

FP-PS-4 Operating Instructions 2 ni.com
1. Use a flat-bladed screwdriver to unlock the DIN rail clip, as
shown in Figure 1.
Figure 1. Unlocking the Rail Clip
2. Attach the lip on the rear of the FP-PS-4 onto the top of a
35 mm DIN rail and press it down onto the DIN rail, as shown
in Figure 2.
Figure 2. Attaching the Module to a DIN Rail
1 Rail clip locked 2 Rail clip unlocked
1 2
FP-PS-4 24VDC
Power
Supply
NATIONA
L INSTR
UMENT
S
INPUT
100-240V 47-63Hz
0.6A Max OUTPUT
24V @0.6A Max
!