Nortel Networks 4065R - Manual (Page 62)

Telephone Options
62
Configuring Mandown Call
The DECT Handset 4065R is equipped with Mandown detection using a
tilt switch on the handset.
Activate to deactivate Mandown using the in the Mandown Call option in
the Telephone Options menu, or press the shortcut Menu
6
. You can
also use this menu to store the phone number and text message for
mandown calls.
Note: If a text message is stored, the mandown call is a text
message. If no text message is stored, the mandown call is a voice
call.
Mandown Call is automatically activated when an SOS number is
programmed in the Mandown Call option. Mandown is automatically de-
activated when the SOS number in the Mandown Call option is deleted.
The message
Mandown Call is displayed when the mandown feature is
activated.
A mandown call is initiated when the handset orientation changes from
upright to horizontal. One of the following occurs:
• If no text message is entered, the Mandown number is dialled (voice
call).
• If a text message is defined, the text message is sent to the defined
Mandown number.
• If no number is defined, Mandown is disabled.
To provide additional security, you can enable an auto answer function on
the handset when Mandown Call is activated. When
Auto Answer
is
activated, the handset automatically answers incoming calls in handsfree
mode. Outgoing mandown calls cannot be initiated during this time,
however the Repeat feature in the Mandown Call menu can be
programmed to make an outgoing mandown call when the incoming auto-
answered call is completed. If
Auto Answer
is not enabled, incoming
calls are rejected while the handset initiates a mandown call.
Mandown timers
To prevent accidental activation of the Mandown Call feature, the handset
provides three timers: