NEC 2060 - Manual (Page 38)

9. PAPER EXIT/ DUPLEX
9-t. EXIT
.
paper roller receives its drive Main Drive Motor (Ml) via a gear train. The is fed onto
exit tray with its printed side down
Paper Exit Paper Roller
Paper Exit Sensor
Upper Fusing Roller
switchback
Registration Roller
9-2. Duplex (Option)
the duplex unit is mounted on the printer, exit roller is to the switchback motor by
way of coupling lever and gear.
1. When the printing cycle is completed for l-sided printing, paper, moving past the exit sensor, is fed out
the printer by exit roller.
2. the printing cycle is completed for the front side in printing, the paper is towards the exit by
exit roller until it moves past the exit sensor. When the paper past the exit sensor,
motor is feeding the paper back to the duplex paper take-up area The transport motor
the paper up to the registration roller. Skew in paper is by registration
then feeds the paper to the image far printing to the back side. The
paper, gone through the print cycle, is fed out of the printer by the exit
C-8