NEC 2060 - Manual (Page 65)

PARTS MANUAL
PREFACE
1. The part numbers listed in Parts Manual are those which were assigned to the parts
making up the machine at the time
was originally introduced onto the market.
2. Parts whose numbers are preceded by an asterisk in the Index Column on the List Page
are parts to be used in only certain market areas. Therefore, please check the number in the Area column on the List Page and then compare it with the numbers given in the Area
on page
to find out which
number is applicable to your own are
a
.
NOTE: Parts for only certain Market Areas: The part numbers for these parts vary
according to market area. In other cases, these parts are used in only areas.
3. The Index Number on the List Page is composed of two numbers and
two letters.
Generally, only A is used as the first letter of the two letters. However, sometimes
C,
used when one part in the illustration, such as an electrical part or a part which
varies according to market ares, has two or more part numbers. The second of th
e
I WO
letters represents the modification
of that part.
4. The Are
a
Number is listed in the Are
a
Column for only those parts used in certain market
areas. This Area Number represents the are
a
listed opposite to it in the Chart given on
Page
Parts having no Area Number
in the Area Column can be used in all
market areas.
5. In the exploded views in
parts manual parts (Screws
W
ashes, etc...) which are
indicated with a “four-digit’ numbers are listed in numerical order in the section ‘SCREWS AND WASHERS. Please check these
numbers with
part numbers
digit” number) which should be used
ordering the parts.
6
.
All parts numbers consist of
which should all be quoted when ordering a part.
The price of parts can be obtained by re
ferring to
“Parts Price List’ which is separately
issued.
7
.
All information contained in this pa
rt
s manual is subject to change.
Copyright
,
CO.
,
LTD.
SEPTEMBE
R
1996