Nortel Networks Nortel 4070 User Manual
Page 174
Telephone settings
174
Editing entries in the Caller filter list
To edit entries in the Caller filter list, perform the following steps:
4.
Press the
Up
or
Down
key to highlight the
Enter
number
option, press the
Select
soft key and use
the
Dialpad
to enter the telephone number and the
name, and then press the
Save
soft key.
OR
Press the
Up
or
Down
key to highlight the
Lookup
contact
option, press the
Select
soft key and use
the
Up
or
Down
key to highlight the required
contact, and then press the
Select
soft key.
Attention: Numbers can consist of a maximum of
32 characters. Names can consist of a maximum of
16 characters.
You can use one asterisk at the end of a number to
filter all numbers that begin with the specified
sequence.
5.
Press the
Clr
key one or more times to return to the
idle display.
1.
Open the
Caller filter
menu as shown in
“Accessing the Caller filter menu” (page 173)
2.
Press the
Up
or
Down
key to highlight the
List
option and press the
Select
soft key.
3.
Press the
Up
or
Down
key to highlight the required
entry and press the
More
soft key.
Caller filter
List
Select
More