Nortel Networks Nortel 4070 - Manual (Page 199)

Handset accessories
199
Enabling and disabling Bluetooth connectivity
To enable and disable Bluetooth connectivity, perform the following steps:
Adding the Bluetooth headset
To add the Bluetooth headset, perform the following steps:
1. Open the Bluetooth configuration menu as shown
in “Accessing the Bluetooth configuration menu”
(page 198) .
2. If the first menu option is Disabled , press the
Select soft key, and then press the Yes soft key to
enable Bluetooth.
OR
If the first menu option is Enabled , press the Select
soft key, and then press the Yes soft key to disable
Bluetooth.
3. Press the Clr key one or more times to return to the
idle display.
1. Open the Bluetooth configuration menu as shown
in “Accessing the Bluetooth configuration menu”
(page 198) .
2. Enable Bluetooth if it is disabled as shown in
“Enabling and disabling Bluetooth connectivity”
(page 199)
.
3. Start pairing mode on your Bluetooth headset (refer
to the headset documentation).
Bluetooth
R
Bluetooth