Nikon UPS - Manual (Page 24)

UPS/400
. . . an IBM AS/400 UPS power monitoring system . . .
24
• Recharge rate: Rate of recharge as defined in the System Setup screen. This value is
expressed as the number of minutes recharging time required to yield one minute of usable
UPS battery time
• Minutes remaining: Number of minutes remaining that the UPS can sustain the system during
a power outage. This value will equal total battery life (above) when the UPS batteries are fully
charged
PERCENTAGE OF UPS BATTERY LIFE REMAINING: This value is graphically indicated as a horizontal
number-line bar and represents the percentage of actual UPS battery time remaining in relation to the total
UPS battery life.
The following is a description of logged UPS/400 activity:
• Elap: Elapsed number of minutes since FIRST power outage (i.e., since UPS was fully
charged.)
• Act Time: Actual time of event
• Status: Status of event. TEST indicates event occurred during UPS/400 Test mode. ACTIVE
indicates event has completed. Note that ACTIVE and DONE will not be reported in Test mode
• Description: Textual description of occurrence. An asterisk (*) indicates a group process that
occurred as a scheduled event in the UPS/400 System Attributes screen
NOTE: You can now access a command line window from the current UPS Status Screen by pressing the
F9 key and then Option 7. This will provide you with greater mobility within the system.