Eizo L985 EX - Manual (Page 16)

English
Signal Cable
(MD-C87/100 enclosed)
D-Sub
mini
15 pin Analog
(Ex.2) Digital
Signal 1 Signal2
2-3. Connecting two PCs to the monitor
Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the
back of the monitor.
Connecting Examples
PC 1 PC 2
(Ex.1) Analog D-Sub
mini 15
pin Signal Cable
(FD-C16 enclosed)
DVI Signal Cable
(FD-C35 enclosed)
Signal Cable
(MD-C87/100 enclosed)
D-Sub
mini
15 pin Analog
NOTE
• When using FD-C16, plug the D-Sub mini 15 pin connector to the computer and
DVI-I connector to the monitor. Wrong connection causes no picture problem.
Selecting the active input
The Input signal selection button on the front panel can be used to select either Signal 1
or Signal 2 as the active input at any time. Every time the button is pressed, the input
changes. When switching the signal, the kind of the input signal (Signal1 or 2/Analog or
Digital) is displayed for a few seconds on the right top corner of the screen.
ENTER AUTO
SIGNAL
1 - 2
Input signal selection button
16
2. CABLE CONNECTION