Eizo L985 EX - Manual (Page 31)

English
To set the gamma value 1.4
∼ 3.0
NOTE
•
If setting the gamma value, the using the monitor in the digital signal input
is recommended.
If using the monitor in the analog input signal, set the gamma value from
1.8 to 2.2.
To change the saturation -16
∼ 16
Setting the minimum level (-16)
turns the image to the
monochrome.
Saturation
To change the flesh color, etc. -20
∼ 20 Hue
NOTE
•
The <Hue> adjustment may cause undisplayable color tone.
Gain
Adjustment Contents
Menu
To adjust <Saturation> and
<Hue> in each color (Red, Yellow,
Green, Cyan, Blue and Magenta) Hue: -20
∼ 20
Saturation: -16
∼ 16
Function Descriptions Adjustable range
Reset
To return the color settings of the
selected mode to the default
settings
Brightness To set the brightness of the
screen 0
∼ 100%
Select the “Reset”.
4. ADJUSTMENT
31
To set the color temperature 4,000
∼ 10,000 K
in 500 K increments (including
9,300 K). Default setting is off
(normal white)
Temperature
(p.45)
NOTE
•
The values shown in the Kelvin are available only as a reference tool.
•
Setting the temperature under 4,000 K or over 10,000 K invalidates the
color temperature setting. (The color temperature’s setting turns “OFF”.)
Gamma (p.44)
NOTE
•
The <Saturation> adjustment may cause undisplayable color tone.
0
∼ 100%
By adjusting the red, green and
blue color tones for each mode,
custom colors can be defined.
Display a white or gray background
image and adjust the <Gain>.
To change each color (red, green
and blue)
NOTE
•
The values shown in the percentage are available only as a reference
tool.
•
Setting the <Temperature> (p.45) invalidates the <Gain> adjustment.
<Gain> setting returns to the defaul.
6 colors