Display, Battery and led – Nokia PT-3 User Manual

Page 7

Advertising
background image

G e t t i n g s t a r t e d

6

Display

The Nokia Fun Camera PT-3 has a display
with a backlight. When the camera is
switched on, the display shows the memory
and battery capacity and preselections with
icons. The default settings on the display are
shown in the picture. See "Using the keys
and display settings" on page 9.

Battery and LED

The battery capacity icon indicates the level of battery power
remaining.

Note that you are able to take pictures when the battery capacity icon
has dropped to one block, but you cannot use the flash. If you try to take
pictures with the flash and there is not enough energy left in the
battery, both the red LED and the flash icon

blink for 2 seconds and

the error sound is played. For the last 10 pictures, the red LED blinks
continuously.

The LED indicates the current status of the camera. It has the following
options:

• The LED is green and blinking, the flash is being activated.

• The LED is green and continuously on, the camera is ready for use.

• The LED is red and blinking, there is an error in the camera. Note that

the icon corresponding to where the error is also blinks.

• The LED is red and continuously on, you have taken a picture with

low battery capacity.

       

Advertising