Nokia PT-3 - Manual (Page 9)

U s i n g t h e c a m e r a
8
■ Using the flash
The Nokia Fun Camera PT-3 has a key for its flash, . When you switch
the power on, the flash is switched on by default. The letter A is shown
next to the flash icon
. In Auto mode, the flash checks the current
light conditions and uses the flash when needed. The other options for
the flash are On and Off. In On mode the flash is used every time a
picture is taken. In Off mode the flash is not used. Note that using the
flash consumes the battery more quickly. See also "Battery and LED" on
page 6.
Do not use the flash on people at close range. Do not cover the flash
while using it.
■ Transferring pictures to a compatible phone
Note: The phone must be switched on to use this function. Do
not switch on the phone when the use of a wireless phone is
prohibited or when it may cause interference or danger.
You can transfer pictures to a
compatible Nokia phone just by
connecting the Nokia Fun Camera PT-
3 to the Pop-Port
TM connector of the
phone. The transfer starts
automatically. Before connecting the
camera and the compatible phone,
turn the power on in both devices. Do
not connect incompatible products.
Note that you cannot take pictures when the camera is connected to a
phone.
All the pictures will be transferred to the phone at the same time,
starting from the latest picture. The pictures are transferred until all
pictures are copied or until the phone memory is full.
During transfer, a counter on the camera display indicates how many
pictures remain to be transferred. Before the transfer, the counter shows
the total number of pictures to be sent, and it starts counting
downwards while transferring proceeds.