National Instruments NI-FBUS - Manual (Page 151)

Index
NI-FBUS Configurator User Manual I-4 ni.com
HSE/H1 Linking Device
device window, 1-8
network parameters window disabled, 1-8
I
I/O parameters, 4-7
IN parameter, 4-20
IN_1 parameter, 4-20
Initialization Manual mode (table), 4-24
initialization requirements for parameters, 4-9
instantiation of function blocks, 2-4
instrument drivers, E-1
IO_OPTS parameter, 4-20
operation bitmasks (table), 4-21
ITK_VER parameter, 4-21
K
KnowledgeBase, E-1
L
L_TYPE parameter, 4-22
linearization types (table), 4-22
language, changing, 2-26
LIM_NOTIFY parameter, 4-22
limiting parameters (table), 4-7
link active schedule, changing, 2-24
links
adding links, 2-2
missing links, B-11
LO_ALM parameter, 4-22
LO_LIM parameter, 4-23
LO_LO_ALM parameter, 4-23
LO_LO_LIM parameter, 4-23
LO_LO_PRI parameter, 4-23
LO_PRI parameter, 4-23
Lookout, using with Fieldbus, B-16
loops
See also multiple loops
changing block execution order, 2-20
defining, 2-17
determining function block execution
time, 2-20
multiple loop representation in schedule
window, 2-25
multiple loops running at different
rates, 2-18
setting the Stale Limit field, 2-21
LOW_CUT parameter, 4-23
M
Manual mode
MODE_BLK parameter, 4-24
overview, 2-6
MANUFAC_ID parameter, 4-23
MAX_NOTIFY parameter, 4-23
MEMORY_SIZE parameter, 4-23
methods, using, 2-22
middle frame
examples (figure), 1-5
overview, 1-4
MIN_CYCLE_T parameter, 4-24
missing device troubleshooting, B-5
missing function blocks, B-14
missing information, B-13
missing link, B-11
mode problems, troubleshooting, B-1
mode shedding parameters, 4-8
MODE_BLK parameter, 4-24
ACTUAL mode (table), 4-24
common operational modes, 2-6
field modes (table), 4-24
NORMAL mode (table), 4-24
operational modes (table), 4-24
overview, 2-6
PERMITTED mode (table), 4-24
TARGET mode (table), 4-24