6 gps simulator (simulator), 7 reset to factory defaults (reset) – Navman 7000 User Manual
Page 17
17
VHF 7000, 7100US, 7100EU Operation Manual
NAVMAN
2-6 GPS Simulator (SIMULATOR)
The GPS Simulator is set to OFF whenever the radio is turned ON or whenever real GPS data is
available through the COM port. However, if you want to test it,
turn it on.
1. Select GPS SIM, then select ON (on) or OFF (off) as
desired.
Whenever the GPS Simulator is turned ON (on), simulated
Speed Over Ground (SOG), Course Over Ground (COG),
and LL position appear on the screen. This data is updated
automatically during the simulation.
It is not possible to send a DSC transmission when in Simulator mode.
2-7 Reset to Factory Defaults (RESET)
Use this to return every setting to the factory defaults
except all MMSID settings and
the entries in your buddy list.
1. Select RESET. The radio asks for confirmation.
2. Select YES to reset the radio and return to the menu.
MENU SELECT
DSC SETUP
RADIO SETUP
>GPS SIM
MENU SELECT
RADIO SETUP
GPS SIM
>RESET
RESET RADIO
ARE YOU SURE
>YES
NO