Navman 7000 - Manual (Page 8)

8 VHF 7000, 7100US, 7100EU Operation Manual NAVMAN
1-6 Basic Operation and Key Functions
All possible keys and their functions are listed. Note that some of the keys are not
available depending on your Navman VHF radio model.
Key Function
VOL/PWR Volume and Power. Turn clockwise to power on. Continue to turn until a
comfortable volume is reached. VOL/PWR will also adjust the settings of an
external speaker, if connected.
SQL Squelch or Threshold Level. Sets the threshold level for the minimum
receiver signal. Turn fully counterclockwise until random noise is heard, then
turn slowly clockwise until the random noise disappears. Make another 1/4
turn clockwise for best reception in open sea conditions.
In areas of high noise (eg close to large cities) reception may improve if
sensitivity is reduced. Either turn SQL slowly clockwise or use the LOCAL
setting. See section 2.3.
16/9 Priority Channel. VHF 7100US only. Also on the microphone. Press to
cancel all other modes and to tune into the priority channel. Press again to
return to your original channel.
The default is Channel 16. To make Channel 09 the priority channel, hold
down 16/9 until a beep sounds and 09 is displayed.
16 Priority Channel. VHF 7100EU and VHF 7000 only. Also on the microphone.
Press to cancel all other modes and to tune into the priority channel, Channel
16, on high power. Press again to return to your original channel.
WX Weather Channel. VHF 7100US and VHF 7000 only. In USA and Canadian
waters, press to hear the most recently selected weather station. The WX
symbol is displayed on the LCD.
Press + or - to change to a different weather channel. Press WX again to
return to the most recent channel.
If the weather alert mode (ALT) is ON and an alert tone of 1050Hz is
broadcast from the weather station, it is picked up automatically and the
alarm sounds. Press any key to hear the weather alert voice message.