NAD T550DVD - Manual (Page 20)

PAGE 20 BASIC OPERATION
Basic Playback
Press the POWER switch.
When the STANDBY is on, you can power on with
the remote control.
Press the OPEN/CLOSE ( )button.
Press the OPEN/CLOSE ( ) button on the remote
control unit.
The disc table comes out.
Load a disc with the label side facing up,
using the disc table guide to align the disc.
Press PLAY button. The disc table will close and
playback will begin. Depending on the disc, a
menu is displayed. If a menu is displayed, refer to
step 4.
Alternatively, press the OPEN button on the
remote control or OPEN/CLOSE button on the
front panel. The disc table will close, and
depending on the disc, playback begins automatically.
Select the item you want to view.
(DVD only)
Select the item with the buttons, then
press the ENTER button.
1
2
3
4
Turn the TV’s power on and set its input to a
position for DVD viewing (VIDEO etc.).
When this unit is connected to a stereo, turn the
power of the stereo components on and select the
appropriate input.
Playing DVDs, CDs and Video CDs
TITLE MENU
1 POP
2 JAZZ
3 COUNTRY
4 R&B
5 CLASSIC
Ex: When a DVD that has
menu screens is loaded
To return to the menu screen
Although this differs depending on the disc, pressing
the TITLE button, the MENU button or the RETURN
button during DVD playback will return the screen to
the menu screen.