NAD T550DVD - Manual (Page 32)

PAGE 32 ADVANCED OPERATION
Once the initial settings have been completed, the
player can always be operated under the same
conditions (especially with DVD discs).
The settings will be retained in the memory until they
are changed, even if the power is switched off.
Press SET UP in the stop mode.
The SET UP menu is displayed.
Press to select the desired item.
The screen will show the current setting for the
selected item.
Press to select the desired setting.
Some items require additional steps.
(See the relevant page.)
To exit SET UP menu
Press SET UP again or press RETURN.
(Return to the stop mode.)
1
2
3
Disc Audio
Rating
Audio Output
Disc Subtitle English
Disc Menu English
Change Password
Speaker Output
English
TV Aspect
TV Mode
Auto
FLT Brightness 100%
16:9 Wide
Two Channel
Stream/PCM
Theatrical
Disc Audio
Rating
Disc Subtitle English
Disc Menu English
English
Theatrical
Common procedures of initial settings SET UP Menu CLEAR
Before setting up the DVD player initially. it is advised
to restore the unit’s default settings.
To set player to the factory default setting, follow
instructions below:
Open tray.
Press the buttons “CLEAR, 2, 5, 8, 0 and
CLEAR” in this exact sequence on the remote
control.
Be sure that the intervals between each press of
a button does not exceed 1 second.
The display will show: “CFG INIT”.
Repeat 2 if “CFG INIT” isn’t displayed.
The unit has now been set to factory default
settings. The SET UP menu looks like this:
The factory default password number is
“1, 2, 3, 4”.
1
2
3
4
5
Center Surround Subwoofer
Disc Audio
Rating
Audio Output
Disc Subtitle English
Disc Menu English
Change Password
Speaker Output
English
TV Aspect
TV Mode
Auto
FLT Brightness 100%
4:3 Letter Box
Multichannel
Stream/PCM
Theatrical