Nvidia Quadro FX 5500 - Manual (Page 32)

NVIDIA Corporation
28 Quadro FX 4500/5500 SDI User’s Guide– Version 2.0
C HAPTER 3
Windows–Using the Graphics to SDI Control Panel
How to Enable Dualview Mode
To enable Dualview mode:
1 Right-click the desktop, then from the pop-up menu, click Properties.
The Display Properties page appears.
2 From the Display Properties page, click the Settings tab.
The Settings page appears.
3 Click the monitor icon that is grayed (not attached) and then check the Extend my
Windows desktop onto this monitor check box.
4 Click OK or Apply.
The SDI settings last set in the Graphics to SDI control panel are preserved under
Dualview mode.