NEC NP3150 - Manual (Page 19)

19
4-2. Wireless LAN
When connecting the wireless LAN, configure the LAN settings in the “WIRELESS” page of
“NETWORK SETTINGS” selected from On-Screen Menu.
■ Flow of Setting
Setting of "CONNECTION".
Select SSID in "SITE SURVEY".
Input "SSID" (if necessary).
Select "NETWORK TYPE" (if necessary).
Select "CHANNEL" (if necessary).
Setting of "SECURITY"
Select "SECURITY TYPE".
Select "KEY SELECT".
Set "KEY 1 to KEY 4".
If "EASY CONNECTION" is selected
8
8
9
10
11
12
13
14
15
16
16
1
3
Step Display "WIRELESS" page of "NETWORK SETTINGS".
4 Step Input "IP ADDRESS".
2 Step Select "PROFILES".
5 Step Input "SUBNET MASK".
6 Step Input "GATEWAY".
7 Step Input "DNS CONFIGURATION".
17 Step Finalize "ADVANCED".
18 Step Reconnect the network.
19 Step Finalize the setting.
Step - Setting of "ADVANCED".
Step Enable or disable "DHCP".
If "Disabled" (without check mark)
If "Enabled" (with check mark)
4. Setting the LAN Setting of Projector
Setting the LAN Setting of Projector
4