NEC NP3150 - Manual (Page 20)

20
■ Setting Wireless LAN
1 Display the “WIRELESS” page of “NETWORK SETTINGS”.
Configure the setting of wireless LAN in the “WIRELESS” page of “NETWORK SETTINGS” selected from
On-Screen Menu.
<1> In the “NETWORK SETTINGS” setting window, if the “GENERAL” tab is highlighted, press the
button to highlight “WIRELESS”.
The “WIRELESS” page will be displayed.
• If “NETWORK SETTINGS” is not displayed, refer to “4-1. Displaying On-Screen Menu (NETWORK
SETTINGS)” ( page 17).
2 Select “PROFILES”.
<1> Press the SELECT ̄ button once to highlight the “PROFILES” field and press the
button.
<2> Use the SELECT ̄/̆ button to highlight “PROFILE 1”, and press the button.
• “PROFILE 1” or “PROFILE 2” can be stored in the memory of the projector as the setting for LAN.
• “EASY CONNECTION” is a mode in which the personal computer that runs Image Express Utility
2.0 in the User Supportware 5 CD-ROM is easily connected to wireless LAN.
Note that “EASY CONNECTION” does not support software other than Image Express Utility 2.0.
• When “EASY CONNECTION” is selected, the IP ADDRESS and SUBNET MASK do not have to be
set. To use “EASY CONNECTION”, the user account of Windows must be [Administrator] privilege
(Windows Vista) or [Computer Administrator] privilege (Windows XP). It cannot be used with Windows
2000.
4. Setting the LAN Setting of Projector