Nextar S3 - Manual (Page 11)

Chapter Ⅳ
Setting
4.3 Backlight setup
Tap in the setting menu to enter Brightness for backlight adjusting,
as shown below.
Tap to adjust the backlight level.
After setting up, tap √ to confirm or tap × to cancel.
4.4 Time and date setup
Tap in the setting menu to enter Time and Date setting menu for
changing to the current time zone, as below shown:
Tap to select the proper Time Zone. Tap to select the
corresponding date/time to adjust, then tap to change the
correspondings.
Then tap √ to confirm or tap × to cancel.
18
4.5 Language selection
Tap in the setting menu to enter languages setting menu for
language selecting, as below shown
Tap to select the languages.Then tap √ to confirm or
tap × to cancel
Chapter Ⅳ
Setting
4.6 Calibrate
Tap in the settings menu to calibrate, the screen will display.
This item is used to calibrate the sensitivity of the touch screen. Tap the center
of “＋” as it moves around the screen. If you touch the center of “＋”every time,
it will disappear after having moved through a cycle(center→top left→bottom
left→bottom right→top right). Tap the screen to return to the settings menu.
Note: If “＋” doesn't disappear, you should calibrate again.
ENGLISH
19
L