Nextar S3 - Manual (Page 5)

Chapter I Preparing the S3 for Use
This chapter guides you to get the S3 started, and also describes the
basic operations of the navigation device.
1 . 1 I n t r o d u c t i o n t o a p p e a r a n c e a n d b u t t o n s
1 . 1 . 1 F r o n t a p p e a r a n c e a n d b u t t o n s :
【Description】
1. Charge indicator: Blue light indicates the charging state, and it goes
out when the charging is completed; A Red Light indicates that the
current system is operating.
2. LCD touch screen: 320× 240 pixels true color, providing you a
perfect visual experience and a supporting touch function;
3
.
MENU button: If the current state is 'power on', hold and press the
MENU power button. The system will automatically shut down and
change into energy saving mode. If the current state is 'power off'
and the battery power has not yet been exhausted, hold and press
the power
this button and the system will startup
1.1.2 Back appearance and buttons:
Chapter Ⅰ
6
STYLUS
Lound speaker
1.1.3 Left-side appearance and buttons
【Description】
Power Socket: DC port is connected with the charge power supply; used
when charging the navigation device
1.2 Charging the device for initial use
1.2.1 For initial use, please charge the battery fully; the steps are as
follows:
1 Plug DC end of charge adapter into the power socket on the left-side of
the device; Plug the other end into the main's supply;
The S3 navigation device has two power supply modes: battery power
supply and main power supply.
When the GPS navigation device is not connected to the charging
adapter,it obtains power from a lithium polymer battery. The battery
consumption sign [
] is visible on the up left corner of the main
system interface. The battery capacity bar [ ] of the
power-setup interface shows the current residual battery capacity.
When the GPS navigation device is connected to the external charging
adapter, it obtains power from the external power supply.。
【 Attention】 The Power Adaptor is not included in the accessories we
offer.
This navigation device has a built-in, irreplaceable lithium polymer
battery. Under normal conditions (such as low backlight brightness), a
fully charged battery can continuously work for about 10 hours. The actual
battery supply time varies depending on how you use the GPS navigation
device. Certain functions (audio, video, high brightness backlight)
consume a large amount of energy and may significantly reduce supply
time.
ON/ OFF button
SD card slot
Earphone Socket
Power Socket
USB Socket
Chapter Ⅰ
7